PA Port Only Adapters are designed to easily mount vacuum cups to an end effector frame.

• Multiple vacuum cup port options available
• Industry standard mounting capability
• Can be used with 1/4 plugs or as a manifold for multiple cups in a series

SGM Split saddle tooling is a nice alternative to using a full crossbar saddle. Each bar is designed with a ported air manifold, optional electric plug and built-in error-proofing pins.

• Steel tube for increased stability
• Ported quick-change air manifold
• Optional electric connection
• Standard error-proof technique

CPI-SGM-TH Orientation Station Receiver and Plate is ideal for nest stations between die operations.

• Aluminum construction
• Keyed plate guarantees correct tool placement
• Mounting pattern for DE-STA-CO TCF and RJM-STS flange mounts

DE-STA-CO's patented Auto-Release Venturi Vacuum Generator with a single air line offers users the fastest vacuum and blow-off in the industry. Vacuum levels will reach as high as 27inhg or -0.88bar at air line pressures of 60psi or 4 bar.

• Speed to vacuum: 0.2-0.3 seconds
• Speed to blowoff: 0.2 seconds
• Noise level: 68dBA
• Air consumption: vacuum = 1.4scfm or 40l/m during vacuum; blowoff = zero

ES Single End Extensions clamp a Port Only Adapter or Venturi to a 25mm or 20mm tube.

• Multiple arm lengths available
• Mounts to 32mm ball, 19mm applecore or 20mm applecore
• Black anodize finish
• M8 Clamping Bolts

GRS Crossbar Saddles, typically used outside the USA, are compatible with 100mm square crossbar rails and are designed with standard automatic air connection.

• Machined aircraft aluminum with removable 40mm clamp caps
• Available with four port air connections
• Left hand and right hand versions standard
• Designed for 40mm tube on 230mm centers

GT Gripper Mounts are used to connect sheet metal grippers to a tri-axis transfer press tool.

• Industry standard mounting capability
• Mounts directly to DE-STA-CO 84A2 and 84A3 sheet metal grippers
• Black anodized finish

GT-MC Tri-Axis Bayonet Manifold adapts air and electric to the tri-axis bayonet.

• Aluminum Air Manifold
• Mounts directly to GTA Bayonet
• Optional electric plug

GTA Tri-Axis Bayonet adapts tri-axis tooling to a rail receiver.

• Aluminum construction
• 30mm diameter post
• Optional air and electric package available
• Black anodized finish

GTS Tri-axis transfer press shovels are available in left hand and right hand versions

• Steel welded construction
• Integrated mount for photo-eye sensor
• 32mm ball mount
• 80mm or 100mm sizes

LWT series aircraft grade aluminum tubing is engineered to minimize weight and deflection while providing the highest possible holding strength when used with lightweight tooling clamp components.

• High tensile strength to weight ratio
• Black anodized finish
• Available in multiple diameters

NPG Nest Guides are used to accurately place parts on a lower nest frame.

• Steel welded construction
• 25mm diameter mounting post
• Mounts easily to DE-STA-CO CL or PC clamp blocks

PC Parallel Clamps connect two tubes parallel to each other.

• Lightweight Parallel clamp design
• Black anodized finish
• 25mm size available
• M8 Clamping Bolts

TCF Flange Clamp is used in conjunction with the Orientation Station Receiver and Plate to mount lower tooling between die operations.

• 25mm diameter clamp
• Aluminum construction
• Black anodize finish
• M8 Clamping Bolt

TCL T-Clamps with removable caps connect two tubes perpendicular to each other in a low profile design making these T-Clamps unique for tight spaces.

• Easily removed or adjusted with hinge clamp design
• Black anodized finish
• Clamps a 1-inch diameter tube with a 1 inch diameter tube
• M8 Clamping Bolts

TCL 32B T-Clamps with removable caps connects a tube to a 32mm ball mount.

• Easily removed or adjusted with hinge clamp design
• Black anodized finish
• Clamps a 20 or 25mm tube with a 32mm ball
• M8 Clamping Bolts

TCL T-Clamps with removable caps connect two tubes perpendicular to each other in a low profile design making these T-Clamps unique for tight spaces.

• Easily removed or adjusted with hinge clamp design
• Black anodized finish
• Clamps 40 & 30mm tubes with 25 & 20mm diameters
• M8 Clamping Bolts

TCL 90 degree T-Clamps with removable caps connects a tube to a 32mm ball mount at a 90 degree angle.

• Easily removed or adjusted with hinge clamp design
• Black anodized finish
• Clamps a 25mm tube with a 32mm ball
• M8 Clamping Bolts

TCL Angle T-Clamps with removable caps connect two tubes, one straight and one angled, to each other in a low profile design making these T-Clamps unique for tight spaces.

• Easily removed or adjusted with hinge clamp design
• Black anodized finish
• Clamps 40mm tubes with 25 & 20mm diameters
• M8 Clamping Bolts